KitchenAid Washer/Dryer Combo Parts (402 results)

Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.

OEM Part - Manufacturer #279834

This drum support roller kit, 349241T, is for dryers. The drum support roller kit holds the drum in place while the drum rotates on the support wheels. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included. Unplug the dryer before installing this part.

OEM Part - Manufacturer #349241T

The drum rollers and drum roller axles often wear out at the same time. If the drum roller axles are worn out, replace them along with the drum rollers.

Affresh® Washing machine cleaner. This cleaner removes and prevents odor-causing residue in all brands of washers. To use, add one tablet to washer with no clothes and select hot water.

- Septic safe
- More effective than bleach.
- Three tablets per package.

OEM Part - Manufacturer #W10135699

Affresh® Dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up.

Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.

OEM Part - Manufacturer #285753A

Helpful tool is the suggested Multi-Bit Screwdriver

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 273570 Dryer Door Latch Kit.

OEM Part - Manufacturer #279570

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 691366 Dryer Idler Pulley.

OEM Part - Manufacturer #WP691366

Consider replacing the Drive Belt while you have the dryer apart.

Be sure to keep up on laundry when you install this replacement drive motor from Whirlpool. This appliance repair piece is compatible with a variety of dryer models. As a genuine Whirlpool replacement part, this motor will help your appliance run smoothly to get your clothes perfectly dry.

OEM Part - Manufacturer #279827

The high quality Whirlpool Burner Igniter Kit (279311 ) ignites the gas to light the oven burner. The Burner Igniter Kit replaces both round and flat igniters and replaces 239233, 239300, 239302, 26000279311, 279185, 279311VP, 338899, 338900, 3389895, 340607, 3415, 343128, 41-311, 6-85211, 660991, 6

OEM Part - Manufacturer #279311

Consider replacing the gas valve coils while you have the dryer apart.

The high quality Whirlpool Clutch (285785 ) spins the basket during the spin cycle. The Clutch is for for direct drive (no belt) washing machines and includes clutch, brake cam driver, two springs (for different size washers), retaining clip and instructions. Please be aware that it is recommended t

OEM Part - Manufacturer #285785

Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.

OEM Part - Manufacturer #WP3363394

Consider replacing the motor coupling while you have the washing machines cabinet off.

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 72017 Touch Up Paint.

OEM Part - Manufacturer #72017

Dryer tri-ring retainer for drum support rollers.

OEM Part - Manufacturer #WPW10512946

Keep your washing machine functioning properly with this transmission from Whirlpool to keep up on your laundry. As a genuine replacement part, rest assured that this electronic piece will operate with your corresponding appliance. This transmission will give the drum of your washer optimal turning

OEM Part - Manufacturer #3360629

The drive coupler can wear out significantly over time. Consider replacing the drive coupler while you have the washer apart.