KitchenAid Washing Machine Parts

Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.

OEM Part - Manufacturer #285753A

Helpful tool is the suggested Multi-Bit Screwdriver

Washing machine agitator directional cogs. These parts are also referred to as "dog ears." 4 per package. If the upper section of the agitator isn't turning properly, then these cogs are likely worn and will require replacement.

OEM Part - Manufacturer #80040

If your washer has an unpleasant odor than we recommend using Affresh washing machine cleaner.

Washing machine agitator repair kit with a medium length cam (there are other kits available for different models). This kit should be used when the top part of the agitator is not moving properly but the bottom part is.

OEM Part - Manufacturer #285811

Consider replacing the bolt and getting a spare set of dog ears. The bolt can get corroded and the dog ears wear out over time.

Washing machine suspension spring. If the suspension spring is broken, the washer will be off balance.

OEM Part - Manufacturer #WP63907

Washing machine clutch assembly with hardware. *Blue spring for large capacity washers, black for compacts. A worn clutch often causes a slower spin speed which leaves the clothes soaked after the cycle.

OEM Part - Manufacturer #285785

Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.

OEM Part - Manufacturer #WP3363394

Consider replacing the motor coupling while you have the washing machines cabinet off.

Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.

OEM Part - Manufacturer #3949247V

If your washing machine has a moldy or musty odor, we recommend cleaning it with Affresh washing machine cleaner.

Screw

OEM Part - Manufacturer #WP308685

Washing machine water inlet valve kit with bracket. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disassembled and cleaned, only replaced.

OEM Part - Manufacturer #285805

Affresh® Washing machine cleaner. This cleaner removes and prevents odor-causing residue in all brands of washers. To use, add one tablet to washer with no clothes and select hot water.

- Septic safe
- More effective than bleach.
- Three tablets per package.

OEM Part - Manufacturer #W10135699

Affresh® Dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up.

Direct drive washer lid switch assembly, If the washing machine does not spin the lid switch may have failed.

OEM Part - Manufacturer #WP8318084

Fabric softener dispenser

OEM Part - Manufacturer #8575076A

Washing machine door boot. If the washer is leaking, the door boot may have a tear in it. Overloading the washer is the most common cause for a torn door boot.

OEM Part - Manufacturer #WP8182119

Check out the Related Items for boot seal clamps and a good washing machine cleaner.

Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.

OEM Part - Manufacturer #WPW10250667