KitchenAid Washing Machine Parts

Washing machine drive motor, 2 speed. If your drive motor is defective, the washer won't spin, agitate, or drain.

OEM Part - Manufacturer #WP661600

Washing machine lid switch assembly. If the washer does not spin the lid switch may be defective.

OEM Part - Manufacturer #285671

Consider ordering the repair manual for your washer.

Washing machine water inlet valve. If the washer does not fill or fills slowly then the water inlet valve may be defective. We do not recommend taking apart water valves to clean them as the risk of failure and water leaking is increased.

OEM Part - Manufacturer #WP8181694

Consider replacing the fill hoses while you are replacing the water inlet valve.

Washer drive block for inner tub. A worn drive block may cause the washer to spin slowly, causing the clothes to be soaked at the end of the cycle. The washer may also make a loud knocking noise at the beginning of the spin cycle.

OEM Part - Manufacturer #WP389140

Washing machine shock absorber. This shock absorber prevents the washer from vibrating by absorbing the movements of the washer tub.

OEM Part - Manufacturer #WP8182703

Washing machine inner drain hose assembly.

OEM Part - Manufacturer #WPW10003250

If your washer has an unpleasant odor than we recommend using Affresh washing machine cleaner.

If the original hose had an eco ball then you will need to discard the ball when installing this new style hose.

OEM Part - Manufacturer #WPW10467168

Screw, 10-24 3/8

OEM Part - Manufacturer #WP90767

Neutral Drain kit

OEM Part - Manufacturer #388253A

Washing machine agitator repair kit. Includes agitator cam and 4 directional cogs (also called dog ears). If the upper section of the agitator isn't turning properly, then the agitator cam and dog ears are likely worn-out and require replacement.

OEM Part - Manufacturer #285751

To purchase the dog ears separately, order item 3109.

Drain hose with housing & retaining clips.

OEM Part - Manufacturer #WPW10096921

Fabric softener dispenser

OEM Part - Manufacturer #63580

5-foot-long rubber fill hose for washing machines. Used for hot or cold water.

OEM Part - Manufacturer #WP89503

Over time, rubber hoses dry out and become susceptible to leaks or bursts. Replace fill hoses every 5 years to reduce the risk of hose failure.