KitchenAid YKEHSO2RMT1 Dryer Replacement Parts

Dryer vent testing kit is for 29" dryers with a top mounted lint screen. Use the plastic card to hang inside your dryer drum, then run the unit three times empty. If the card stays in place, the venting and dryer need to be cleaned out. Complete instructions are included.

Plastic card that you hang inside your dryer drum (complete instructions are included), then run it 3 times, empty. If card stays in place venting and dryer need to be cleaned out.

Screw, 10-16 x 7/8

Spray Paint - White

Drying rack - designed for Whirlpool 27 inch dryers with lint screens located inside the front door opening

Lint screen outlet housing

Side or bottom venting kit

Outlet housing seal with adhesive strip 15 in

Terminal block connection and wire kit, main power

Screw, 10-16 X 1/2

Screw, baffle mounting

Hex nut, left hand thread

Universal Connect Flexable Vent. 4" diameter extends to five feet.

High limit thermostat, L295-50F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer will not heat.

Use a multimeter to test your thermostat for continuity.